GSA
Product detail
GSA
WEIGHING COMPUTER WORKING MODE
CONNECTION OF THE SYSTEM
KEYBOARD AND DISPLAY
TO START
- Switch-on / Switch-off
- Display upon switch-on
- Tare resetting
- Partial load with weight zeroing
- Displaying the weight value measured by the external scales
- Starting an automatic loading
- Starting a single loading
- Start of a recipe by input
- Check of the starting time of a time programming
- Download of loading data on USB Pendrive
- Control of the additional Multilink modules in error
- Block of modifications by means of PIN CODE
Download of loading data on USB Pendrive (by request)
In order to download the loading and unloading data on a USB Pendrive, plug the USB Pendrive into the specific connector, while being in the total weight menu.
The weighing indicator will automatically download the data concerning the loading operations carried out since the last download.
Should the data be accidentally lost, it is possible to retrieve the data of the last 1000 loading operations carried out by the weighing indicator, by entering the menu “USB OPERATIONS BACKUP” (see instructions later).
During the download of the data, a message of saving in progress is shown on the display. In order to prevent errors, do not remove the USB key from the dedicated connector during the download operation.
The function of data download on the USB pendrive is provided by request, and can be enabled by code only.
